bq Witbox

Logo CE

bq Witbox

bq Witbox.
First steps




Large print volume

The bq Witbox is a domestic printer with DIN-A4 print volume (21 x 29.7 cm) and a height of up to 20 cm, meaning it has a greater capacity to print large-scale objects and multiple parts simultaneously than any other printer.

Made by us in Spain

We manufacture the bq Witbox at our Spanish factory in Navarra, which is dedicated exclusively to the design and production of our printers. As we manufacture our own products, we’re able to enforce the very tightest quality controls, and we also apply our exacting standards to our consumables on our dedicated production line in the Spanish town of Huesca.

Where beauty and safety combine

The bq Witbox has been painstakingly designed to optimise its functionality. It’s a fully enclosed printer with a locking front door system, preventing accidental access during printing and making it a particularly safe to use around children. The fully enclosed design helps to minimise noise, while preventing heat from escaping and controlling airflow - thus maintaining a constant temperature inside the printer.

A totally innovative printing system

The bq Witbox incorporates an innovative printing system inspired by the Fibonacci spiral, using a PTFE tube to feed the filament through. Thanks to this design, the feeder system is housed within the printer unit itself, reducing the amount of contact between the filament and the tube. This optimised design, combined with the reinforced Witbox chassis, enables you to create a printer network by stacking up to three bq Witboxes one on top of the other.

3D printing of spectacular quality

Several factors affect the quality of 3D printing. One of them is the height of each layer: the lower the height, the better the level of detail and resolution of the printed object. It´s also very important for the printing base to be as level as possible. A toughened, laminated* glass base is incorporated in Witbox.

* For optimum printing, lacquer must be sprayed on the base before you start printing.

Open Source

You can run Witbox printer with a variety of open source software such as Slic3r™, Cura™, Pronterface™ and Repetier™. Enjoy greater freedom of use, greater compatibility and total technological independence.

The hardware of bq Witbox is 100% open source, meaning you can modify it and adapt it however you like. At bq we´re keen to share all our improvements, without restricting knowledge.

Support, all year round

Our commitment to our users: to be by your side for the entire life of your printer. We offer a two-year warranty for materials and labour, and in the event of an incident, we can deliver replacement parts anywhere in the world within 72 hours. We have over 150 technicians available 365 days a year, and the high quality of our support team has been recognised officially by the exclusive ISO 20000 accreditation.









days per year

Technical specifications

Download file
Colours available White Black
Ramps 1.4
Mega 2560
LCD screen with rotary encoder and push-button navigation
348W power source
100k thermistors in the extruder
40W, 12V heater cartridge
Layer Resolution
High: 50 microns
Medium: 200 microns
Low: 300 microns
Print speed
Recommended speed: 60 mm/sec
Maximum recommended speed: 80 mm/sec
Filament diameter: 1.75 mm
Dimensions (work area): Size DIN A4 x 20 cm high (the largest on the market)
Dimensions (printer): length - 505 mm, width - 388 mm, height - 450 mm
Dimensions (box): 64cm x 55cm x 65cm
General Mechanics
Powder-coated steel chassis
Toughened chrome bars for carriages X, Y and Z
Igus bearings for X,Y and Z
Igus cable-chains
Igus power screw for the Z axis with flexible motor coupling
Three-point printer base levelling system with damping
Powder-coated moving parts and supports
A4-sized tempered glass base*
Quick-change printer base system with neodymium magnets
Extruder Mechanics
Single extruder
Own-design extruder
0.4 mm nozzles
Cooling system for parts
Safety Features
EC certification
Enclosed device with door-safety feature
Pre-configured Marlin firmware
Compatible hosts: Repetier, Pronterface, Cura, ReplicatorG
Slic3r (recommended and pre-configured)
SD card reader with 4 GB card included
USB port
Box content
1 free PLA reel
1 replacement hot end
Tools for replacing the hot end
2 needles for extruder maintenance
Witbox feet
Printed test part
Tempered glass base
Option of stacking and linking up to three printers one on top of the other, avoiding the need for additional shelving.
The system is inspired by the Fibonacci spiral, with a PTFE tube for threading the filament.
This innovative system means the filament feeder tubes are fully housed with the interior of the machine, giving the device greater aesthetic appeal and ensuring that friction is kept to a minimum. We recommend that you only stack a maximum of three Witbox printers.
License Creative Commons - Attribution - Share Alike

* For optimum printing, lacquer must be sprayed on the base before you start printing.


View all





where to buy

The device is available from the following retailers:

Check availability at each centre.

Download image
Download image
Download image
Download image