3D printer

1.690,00€ Buy

Large print volume

The Witbox is a domestic printer with DIN-A4 print volume (21cm x 29.7 cm) and a height of up to 20 cm, meaning it has a greater capacity to print large scale objects and multiple parts simultaneously than any other printer.

Made by us in Spain

We manufacture the Witbox at our Spanish factory in Navarra, which is dedicated exclusively to the design and production of our printers. As we manufacture our own products, we’re able to enforce the very tightest quality controls, and we also apply our exacting standards to our consumables on our dedicated production line in the Spanish town of Huesca.

Where beauty and safety combine

The Witbox has been painstakingly designed to optimise its functionality. It’s a fully enclosed printer with a locking door safety system, preventing accidental access during printing and making it a particularly safe to use around children. The fully enclosed design helps to minimise noise, while preventing heat from escaping and controlling airflow - thus maintaining a constant temperature inside the printer

A totally innovative printing system

The Witbox incorporates an innovative printing system inspired by the Fibonacci spiral, using a PTFE tube to feed the filament through. Thanks to this design, the feeder system is housed within the printer unit itself, reducing the amount of contact between the filament and the tube. This optimised design, combined with the reinforced Witbox chassis, enables you to create a printer network by stacking up to three Witboxes one on top of the other.

3D printing of spectacular quality

Several factors affect the quality of 3D printing. One of them is the height of each layer: the lower the height, the better the level of detail and resolution of the printed object. It´s also very important for the printing base to be as level as possible. A toughened, laminated* glass base is incorporated in Witbox.

* For optimum printing, lacquer must be sprayed on the base before you start printing.

Open Source

You can run Witbox printer with a variety of open source software such as Slic3r™, Cura™, Pronterface™ and Repetier™. Enjoy greater freedom of use, greater compatibility and total technological independenc

The hardware of Witbox is 100% open source, meaning you can modify it and adapt it however you

Support, all year round

Our commitment to our users: to be by your side for the entire life of your printer. We offer a two-year warranty for materials and labour, and in the event of an incident, we can deliver replacement parts anywhere in the world within 72 hours. We have over 150 technicians available 365 days a year, and the high quality of our support team has been recognised officially by the exclusive ISO 20000 accreditation.


    • Witbox


  • Colours available

  • Printing speed

    • Recommended speed: 60 mm/sec
      Filament diameter: 1.75 mm
      Maximum recommended speed: 80 mm/sec
  • Resolution

    • High: 50 microns
      Medium: 200 microns
      Low: 300 microns
  • Dimensions

    • Dimensions (work area): Size DIN A4 x 20 cm high (the largest on the market)
      Dimensions (box): 64 cm x 55 cm x 65 cm
      Dimensions (printer): length - 505 mm, width - 388 mm, height - 450 mm
  • Materials

    • PLA
  • Extruder mechanics

    • Single extruder
      0.4 mm nozzles
      Own design extruder
      Cooling system for parts
  • General mechanics

    • Powder-coated steel chassis
      Igus bearings for X,Y and Z
      Igus power screw for the Z axis with flexible motor coupling
      Powder-coated moving parts and supports
      Quick-change printer base system with neodymium magnets
      Toughened chrome bars for carriages X, Y and Z
      Igus cable-chains
      Three-point printer base levelling system with damping
      A4-sized tempered glass base*
  • Electronics

    • Ramps 1.4
      LCD screen with rotary encoder and push-button navigation
      40 W, 12 V heater cartridge
      Mega 2560
      348 W power source
      100k thermistors in the extruder
  • Software

    • Preconfigured Marlin firmware
      Slic3r (recommended and preconfigured)
      Compatible hosts: Repetier, Pronterface, Cura, ReplicatorG
  • Communications

    • SD card reader with 4 GB card included
      USB port
  • Security

    • EC certification. Enclosed device with door safety feature
      EC certification. Enclosed device with door-safety feature
  • Box contents

    • 1 free PLA reel
      Tools for replacing the hot end
      Printed test part
      1 replacement hot end
      2 needles for extruder maintenance
      Witbox feet
      Tempered glass base
  • Others

    • Option of stacking and linking up to three printers one on top of the other, avoiding the need for additional shelving.
      The system is inspired by the Fibonacci spiral, with a PTFE tube for threading the filament.
      This innovative system means the filament feeder tubes are fully housed with the interior of the machine, giving the device greater aesthetic appeal and ensuring that friction is kept to a minimum. We recommend that you only stack a maximum of three Witbox printers.
  • Licence

    • Creative Commons - Attribution - Share Alike